GENTAUR Contact Gentaur

Up

GENTAUR Survey

GENTAUR EUROPE

+32 1658 9045
+32 1650 9045

BELGIUM1

tel +32 2 732 5688
fax +32 2 732 4414
info@gentaur.com
Av. de l' Armée 68
B-1040 Brussels

France

tel 01 43 25 01 50
fax 01 43 25 01 60
9, rue Lagrange
75005 Paris

Italy

tel 02 36 00 65 93
fax 02 36 00 65 94
20135 Milano

Germany

tel +32 16 58 90 45
fax +32 16 50 90 45
Forckenbeckstraße 6
D-52074 Aachen

Japan

tel +81 78 386 0860
fax +81 78 306 0296
Minaatojimaminami-manchi
Chuo-ku, Kobe
065-0047


 VX-200 Vortex Mixer



Continuously variable speed makes the Vortex Mixer VX-200 useful for a variety of applications, from gentle mixing to resuspending pellets. The unit has a circular orbit, rather than the elliptical orbit found on many other vortexers. This allows a vortexing motion to be achieved even at low speeds, a task that cannot be accomplished with eliptical orbit units.

 
Many vortex mixers prevent excessive vibration with added weight or suction feet which hold the unit in position. ration during operation and prevent the unit from walking across the bench, even at high speeds. The Vortex Mixer VX-200 is lightweight and has no suction feet, allowing it to be easily moved from one place to another.

The Vortex Mixer VX-200 can be operated in either touch or continuous mode. When in touch mode, the motion is activated by depressing the sample head and stopped by removing the pressure. If the unit is set in the on position, the Vortex Mixer VX-200 will operate continuously until turned off. The small footprint and portability of the Vortex Mixer VX-200 allow it to be used almost anywhere. The unit is safe for use in temperature controlled environments.




                   Click to enlarge image

The CombiCup head supplied with the Vortex Mixer VX-200 can be used with a single tube or a whole handful. The unique over molding technology used in the manufacutre of the CombiCup provides a sturdy plastic core surrounded with nonslip TPE. Optional heads accept microplates,  microtubes, PCR strip tubes,15 and 50 ml tubes and blood tubes. All heads are friction fit - simply pull up to remove and press down to replace.


To get technical specification and ordering information click here:

VX200Vortex.pdf




Home Up

send mail to webmaster@gentaur.com with questions or comments about this web site.
Copyright © 2008 Gentaur Molecular Products
Site powered by Acid Dragon (AC)
Last modified: 05/19/16